Advanced Thermoset Solution Fluoropolymer
A high-solids fluoropolymer coating that provides an ultra-durable metallic or pearlescent finish. It has outstanding color and gloss retention even in the most severe exposures. Under certain conditions, it may be used to restore aged fluoropolymer coil applied coatings. Contact Tnemec Technical Services or your local Tnemec representative for details.
Standard Series 1078 colors will meet the requirements of the Metallic Pigmented coatings category for use in air districts with more restrictive VOC regulations.View more product details
Product Data Sheets
Safety Data SheetsEmail this product
This product is available in 42 colors.
View Available Colors
View available colors in our Color Tool; you can also select and request color swatches.
54.0 ± 2.0% (mixed) †
2.0 to 3.0 mils (50 to 75 microns) per coat.
Steel: Series 1, 27, 27WB, 66, L69, L69F, N69, N69F, V69, V69F, 90-97, H90-97, 91-H_2_0, 94-H_2_0, 118, 135, 161, 394, 1224.
Note: Series 1 and 394 require an intermediate coat prior to topcoating with Series 1078. Note: Series 118 is typically used to overcoat, sound, existing coating systems. See product data sheet for more information.
866 mil sq ft/gal (21.3 m²/L at 25 microns). †
Volatile Organic Compounds
Unthinned: 2.94 lbs/gallon (352 grams/litre)
Thinned 15% (No. 63 Thinner): 3.43 lbs/gallon (411 grams/litre) †
Number of Components
Two: Part A and Part B
Series 1079-0762 (semi-gloss), 1079-0763 (satin)
Note: When topcoating with Series 1079-0762 (semi-gloss) or 1079-0763 (satin) over 1078, a 24 hour maximum recoat time applies. Series 1078 cannot be topcoated with Series 1079 (high gloss).
Unthinned: 4.09 lbs/gal solids
Thinned 15% (No. 63 Thinner): 4.06 lbs/gal solids
Note: When topcoating with Series 1078, the following maximum recoat times apply: Over 27, 66, L69, L69F, N69, N69F, V69, V69F, 135, 161 14 days; over itself, 30 days; over 750, 1075, 1075U, 1095, 45 days; over 1, 394, 60 days; over 73, 90-97, H90-97, 91-H_2_0, 94-H_2_0, 1224, 90 days. Note: If an intermediate coat is required, it should be in the same color family but noticeably different than the topcoat color. Tnemec will specify the intermediate color.
|Temperature||To Touch||To Handle||Minimum Recoat ‡|
|90°F (32°C)||30 minutes||4-6 hours||6-8 hours|
|70°F (21°C)||30 minutes||6-8 hours||10-12 hours|
|50°F (10°C)||1 hour||12-15 hours||16-24 hours|
‡ Maximum recoat: 30 days. Curing time varies with surface temperature, air movement, humidity and film thickness. Note: For faster curing and low-temperature applications, add No. 44-710 Urethane Accelerator; see separate data sheet.
Still have questions? Request the information you’re looking for:Request Info
How to Purchase
Tnemec coatings are sold through a select network of local independent sales representatives who can help you find the best product for your needs. Find a rep